Buy Online Holley 0-8007 Model 4160 390 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor

Buy Holley 0-8007 Model 4160 390 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor

Holley 0-8007 Model 4160 390 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor Product Description:

• Power valve blow-out protection adds trouble free operation
• Single feed push-on style fuel inlet with vacuum secondary type
• Dichromate finish with side-hung floats
• Provides maximum performance on street and mild race vehicles
• Electric choke with 2 x 4 street tunnel rams

Product Description

This carburetor provides maximum performance on street and mild race vehicles and is a universal 4-barrel carburetor. It should not be used with adaptors on spread bore type intake manifolds. It is 100-percent wet-flow tested and calibrated for street drivability and includes an electric choke with 2 x 4 street tunnel rams.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Holley Carburetor 4160
By Bruce D. Legendre
Great value for the money. Installation instructions were complete and the packaging was excellent.

2 of 2 people found the following review helpful.
Special application Holley 4160
By "O" Man
I received my Holley carb very quickly, bolted it on straight out of the box. Fired right up and ran well without adjustment. To be perfect it required very minor adjustment This was a special application on a GMC 292 c.i. inline 6 cyl with an Offenhauser manifold.

0 of 0 people found the following review helpful.
Worked like a champ! 390cfm 4bbl
By Aaron McEwen
I bought this to replace the (much too big) Eddy 600cfm on my 1974 CJ-5 4.2L that I inherited. I bolted it on and it ran MUCH better. I went to AZ emissions and passed the cruise but barely failed the idle test. I brought it home and hooked up my vacuum gauge, and dialed the idle down to peak vacuum. It was around 16.5-17 with the idle mixture screws both real close to 3/4 turns out. Went back to emissions and passed idle. Now I'm licensed and jeep'n. Once I finish work on the jeep body, I'll go back and plug in my wide-band O2 sensor and dial in the cruise jets and everything else. But for now, it works great right out of the box.Note that this engine has about 1000miles since rebuild, new plugs/dizzy/coil/everything. That may have helped on the emissions test. It does have a fuel vapor can, but no EGR or cat. Not required that year...

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Get Cheap Olympus PT-019 Underwater Housing for Olympus C-5000 Digital Camera

Buy Olympus PT-019 Underwater Housing for Olympus C-5000 Digital Camera

Olympus PT-019 Underwater Housing for Olympus C-5000 Digital Camera Product Description:

• Designed for use with Olympus C-5000 digital camera in underwater or during extreme environmental conditions
• Constructed of a transparent and durable polycarbonate, and waterproof at depths up to 131 feet
• Integrated mechanical controls give you access to all your camera's functions
• Features O-ring main seal, a safety lock, stainless steel and nickel-plated brass hardware, and adjustable positive-to-neutral buoyancy
• Weighs 1.15 pounds, measures 4.2 x 4.9 x 4.8 inches (W x H x D)

Product Description

The PT-019 underwater case has been specially customized for the C-5000ZOOM and is waterproof up to a water pressure equivalent to a depth of 40 meters. This case is perfect for fascinating underwater photography or capturing the thrill of water sports and activities. With its durable, high quality poly carbonate construction, it protects the camera from water while also cushioning it from knocks and bumps on land. Complete control of photo functions, such as zoom and flash mode, is also permitted.

Waterproof up to 40 m depth
All Camera functions can be controlled
Detachable LCD Hood for LCD monitor
Internal Flash can be used underwater to trigger digital compatible slave
Standard tripod socket permits attachment of lighting to tray

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Great Little Housing
By divebb
GREAT DEAL on a very basic housing. I've had an Olympus C5000 for over 6 years and had considered an U/W housing in the past. But after looking at the cost of a new camera and a new housing, this was a GREAT DEAL. The camera fit is a little snug but after working with it it finally goes.As with ANY U/W housing you must be VERY careful in your setting up to use. It either works or floods. You cannot just throw it together and go. If thats your idea, either buy cheap disposable cameras or have lots of money to blow, once its flooded you now have a 14 oz. paperweight/camera.

0 of 0 people found the following review helpful.
underwater photography
By J. Williams
Bought this after having a Nikonos underwater camera years ago. It was a good alternative for a casual sport diver. Bought the camera to fit in it on Ebay and had the whole system for about $50. Used it to about 100ft with no problems. Light is a problem if you go very deep at all. Camera flash is not powerful enough for anything more than a few feet away. Also a good case for rafting or just playing in the water. Take some time to get use to the controls before you get underwater. A spare battery and large memory card are also nice.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where to Buy Holley 0-7448 Model 2300 350 CFM 2-Barrel Manual Choke New Carburetor

Buy Holley 0-7448 Model 2300 350 CFM 2-Barrel Manual Choke New Carburetor

Holley 0-7448 Model 2300 350 CFM 2-Barrel Manual Choke New Carburetor Product Description:

• Power valve blow-out protection adds trouble free operation
• Single feed fuel inlet with center hung float
• Dichromate finish and factory 30cc accelerator pump
• Manual choke for easy control of engine warm up
• 100-percent wet-flow tested and calibrated for street drivability

Product Description

This carburetor is perfect for racing classes where 2-barrel carburetors are required. It features a manual choke, center hung float bowl, universal throttle lever, all-metal parts, and replaceable jets. It also includes a power valve, high flow venturi, and a standard 5-1/8 air cleaner flange. It mixes the right amount of gasoline with air so that the engine runs properly and has a manual choke for easy control of engine warm up.

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
Perfect for Internationals
By Edward Thomas
I bought this to replace the carb on my 1960 International Harvester B110 truck. The old one on the 266 v8 had a broken throttle plate and needed a rebuild in the worst way so I figured I should just buy a new one. Puting it on was pretty easy; the only issue there was is that the fuel line and choke cable inpute are on the other side compaired to the older 2300 models. As for tuning, the idle mixture seemed to be spot on, the only thing I adjusted was the float level, it was a bit low. The carb runns great, I expected it to be way too rich for for my 266 but it turned out to be perfect at 44ft above sea level. If you have heat issues, you may want to swing by Napa and buy a thicker mounting gasket with a bowl heat sheild as the one that comes in the box is paper thin.

0 of 0 people found the following review helpful.
holley carburetor
By its2easy
this carb. was reasonal price. it was pack good and no damage when recieved. the item was descride verry good. thanks John

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!