Buy Online Broan Model 120 Heater, 500/1000 Watt 120 VAC, White Grille

Broan Model 120 Heater, 500/1000 Watt 120 VAC, White GrilleBuy Broan Model 120 Heater, 500/1000 Watt 120 VAC, White Grille

Broan Model 120 Heater, 500/1000 Watt 120 VAC, White Grille Product Description:



  • Factory wired for 1000 watt at 120 VAC-easily converts to 500 watt at 120 volt or 1000 watt at 240VAC
  • The look of a central forced air heating with the convenience of zonal control
  • Sturdy one piece steel grille-louvers direct air downward for even heat distribution
  • Broan-designed blower with permanently lubricated motor for quiet, reliable air delivery-quick room warm up
  • Manual reset-thermal overload protection

Product Description

These Powerful Heaters are Factory Wired at 1000W, 1500W and 2000W and Can Be Easily Converted to Half-Wattage for Added Versatility. The Low Wall Mounting and Register-Look Grille, in Neutral White Finish, Mean TheyÕre Designed to Be as Inconspicuous as they are Efficient. Plus, they DonÕt Restrict Furniture Placement the Way Baseboard Heaters Can. Broan 120 500/1000W 120VAC Register Heater Factory Wired for 1000W at 120 VAC Ð Easily Converts to 500W at 120V, or 1000W at 240VAC. The Look of Central Forced Air Heating; the Convenience of Zonal Control. Sturdy, One-Piece Steel Grille; Louvers Direct Air Downward for Even Heat Distribution. Broan-Designed Blower with Permanently Lubricated Motor for Quiet, Reliable Air Delivery; Quick Room Warm-Up. Heat Ranges for Virtually Any Size Room. Manual Reset, Thermal Overload Protection. Operates from Convenient Wall-Mounted Line-Voltage Thermostat - Broan Model 86W (Available Separately).

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5excellent unit for the size and price
By donald e ruth III
purchased this unit for a small basement bathroom and it provides plenty of heat..a little noisy at times but overall a good unit..low profile..blends well with the wall

0 of 0 people found the following review helpful.
5Broan Model 120 Heater, 500/1000 Watt 120 volt
By Joe
I purchased this unit to be installed in a wall in a bathroom as an auxiliary heater. I am pleased with its performance. At the 1000 watt setting it does produce adequate heat. At the 500 watt setting, it heats, but a bit weak. The fan is reasonably quiet. It's easy to install.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Broan Model 120 Heater, 500/1000 Watt 120 VAC, White Grille

Low Price 1/10 ct. tw. Certified Diamond Heart Pendant in 10K White Gold

1/10 ct. tw. Certified Diamond Heart Pendant in 10K White GoldBuy 1/10 ct. tw. Certified Diamond Heart Pendant in 10K White Gold

1/10 ct. tw. Certified Diamond Heart Pendant in 10K White Gold Product Description:









Product Description

This gorgeous heart pendant features 1/10 ct. tw. certified near colorless round brilliant Diamonds set in a 10K white gold heart shape. Certification and complimentary chain are included.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4VERY NICE
By L. Tomei
Very nice item, my girlfriend loved it. The necklace is a bit thin and maybe a bit too long. Overall was a great gift.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy 1/10 ct. tw. Certified Diamond Heart Pendant in 10K White Gold

For Sale Online Brother MFC-8840D Laser Multifunction

Brother MFC-8840D Laser MultifunctionBuy Brother MFC-8840D Laser Multifunction

Brother MFC-8840D Laser Multifunction Product Description:



  • Printer, copier, scanner, fax, and PC fax
  • Up to 21 ppm print and copy speed; up to 2,400 x 600 print resolution
  • Automatic duplexing; reduce/enlarge 25% to 400%
  • Fax forward/paging, 40 one-touch memory locations
  • Parallel and USB interfaces, PC and Mac compatible

Product Description

Brother MFC-8840D Laser Multifunction

Customer Reviews

Most helpful customer reviews

36 of 37 people found the following review helpful.
5Does What it Promises...and Very Well...recommended
By Amrit Tiwana
This the third Brother laser printer I've purchased in the past seven years. This machine was a logical first choice based on my good experience with this brand. I've had this one for about four months and have put it to heavy use. Simply put, this machine does exactly what it promises and without any glitch. I used it with both my Mac and Windows XP PC at home; the software integrates well. Four other positives are worth mentioning: (1) the toner refills are inexpensive ($60 for the 7,000 page version), (2) they can be reliably refilled once each with the toner refill kits off of ebay ($12-16 each; not a messy process), (3) mine's not as loud as another reviewer's unit seemed to be (or maybe I'm used to the level of noise from Brother printers;), (4) The duplexing works very reliably (not a single jam since I bought this unit). Highly recommended.

41 of 43 people found the following review helpful.
3Good, but some small issues
By Kris Ganjam
Pros: For $450, getting a fax + copier + scanner + duplex laser printer is a pretty good deal. I considered buying higher quality printer, scanner and fax-modem components separately and then using my computer to integrate them, but there is something to be said for "press-a-button" copying and faxing that just works. I've found a lot of unexpected uses for the copy machine - no longer need to tote the whole textbook; just copy the chapter I plan to read, etc. The N-in-1 feature is useful - you can fit many textbook pages onto a single sheet. The printer is completely quiet when idle, though it takes a few minutes to fan down after printing something.Cons: My biggest requirement in a printer was built-in duplex (double-sided printing). I couldn't find another laser duplex multifunction device for under $1000. (For those deciding, if black & white text print quality matters to you, do NOT buy an ink jet - or at least do a careful side-by-side print comparison. Laser is much better.) Anyway, I was pretty mad to find out that this printer only supports printing at 600 DPI duplex. There was absolutely no mention of this in the specs. There is a noticeable quality difference between 600 and the HQ1200 mode. Lots of jaggies in 600 dpi - almost looks like my old deskjet, though slightly better. It's still suitable for documents you'll just read over once. The other con is that this printer is darned ugly. When photocopying a textbook it is almost impossible not to accidentally press at least 10 of the over 50 buttons littering the front panel. It would have been nice if the cover was removable - I have had trouble scanning some textbooks that really aren't that large. My experience with Brother customer service was pretty bad - I had to literally wait 45 minutes on hold to speak to someone about the duplex issue.

26 of 27 people found the following review helpful.
5A Slick Machine....
By Jazzspielen
After much research and some looking and testing, decided to go for this Brother machine based on reviews and my other good experiences with Brother equipment. Bought this at Costco for somewhere around $375. Set up was a breeze -- less than 30 minutes, and no problems with XP Pro. Networked it to my colleagues without problems. Works like a champ. Faxing is a breeze and sheet feeder is fast and well-designed. Copying is also slick. Printing has been fast with sharp text. Have not needed to scan anything yet. Toner save is a real plus for us b/c of the volume of faxes, copies, etc. that come through every day. Making command changes is a snap and pretty much intuitive. I thought the manual was very clearly written, and it's easy to find command changes you want. The size of the thing is a little intimidating -- I think it frightened away our other little inkjet, but I'm perfectly happy with it -- in fact, I think we got a steal on this thing. If you're looking for a sturdy, reliable, quick, 4-in-1 laser, take a look at this one. I think Brother has pretty much won me over -- I still have HP's, Epsons, and Canon printers around, but Brother is making some darn good quality stuff these days. I know there are a ton of 4-in-1 machines out there and prices are dropping quickly, but give this one a shot as you're looking around. I'm sure glad I got me a Brother.

See all 32 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Brother MFC-8840D Laser Multifunction

Best Price Nilfisk Advance Plastic Vacuum Hose w/ Curved Plastic Tube (12041500) (Repl. 11691000)

Nilfisk Advance Plastic Vacuum Hose w/ Curved Plastic Tube (12041500) (Repl. 11691000)Buy Nilfisk Advance Plastic Vacuum Hose w/ Curved Plastic Tube (12041500) (Repl. 11691000)

Nilfisk Advance Plastic Vacuum Hose w/ Curved Plastic Tube (12041500) (Repl. 11691000) Product Description:



  • Accessory for Nilfisk Vacuums.
  • Please ensure part number matches exactly with part number your vacuum requires.

Product Description

Nilfisk Plastic Vacuum Hose w/ Curved Plastic Tube (mfg. part# 12041500) (Repl. 11691000) for models GM80, GS80, GM90, GS90

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Quality made.
By NVYGRL
Bought this new hose when I broke my old one. It did not fit on my Nilfisk but I was able to disassemble the head and use it on my old hose since that was the only part that was broken. Quality product.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Nilfisk Advance Plastic Vacuum Hose w/ Curved Plastic Tube (12041500) (Repl. 11691000)

Price Compare IQAir® GC MultiGas Cartridges

IQAir® GC MultiGas CartridgesBuy IQAir® GC MultiGas Cartridges

IQAir® GC MultiGas Cartridges Product Description:



  • Set of 4 replacement gas cartridges for the GC MultiGas
  • 12 lbs. of granular activated carbon & alumina impregnated with potassium permanganate
  • Lasts up to 30 months

Product Description

Part of what makes the IQAir GC MultiGas air purifier so incredibly efficient at removing chemicals and odors in the air is that it's designed totally around this set of four disposable gas cartridges that contain the best media in the industry. Not only do these gas cartridges feature 12 pounds of the highest-grade activated carbon from bituminous coal (not the cheap coconut-shell carbon others use), they also feature alumina pellets impregnated with potassium permanganate to remove formaldehyde from the air. Cylindrical in shape, the GC MultiGas cartridges provide optimal contact between the air and the filtration media, while offering very low air restriction. So even if you suffer from chemical sensitivities, the CG MultiGas cartridges when installed in the CG MultiGas air purifier are unequaled in cleaning the air you breathe.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5GC Multigas Gas Catridge Filters Work
By Tomi Kadiri
The IQ Air line of products are really terrific. If you're an allergy sufferer, you must try them. Without my air filter, my nose gets stuffy and I have trouble sleeping. With the IQ Air and GC Multigas filters, I'm clear.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy IQAir® GC MultiGas Cartridges

Buying Nilfisk GM-80 Vacuum (HEPA) (Residential-01790032)

Nilfisk GM-80 Vacuum (HEPA) (Residential-01790032)Buy Nilfisk GM-80 Vacuum (HEPA) (Residential-01790032)

Nilfisk GM-80 Vacuum (HEPA) (Residential-01790032) Product Description:



  • Industrial strength HEPA vacuum for residential use.
  • Includes all standard accessories.

Product Description

Tailored for residential vacuuming, the GM80 Residential Vacuum is a versatile and durable bagged vacuum built for a variety of household cleaning tasks. Along with powerful airflow and suction, this vacuum cleaner features a sealed filtration system, in your choice of HEPA- or ULPA-grade, that removes and contains harmful dust and allergens. A large capacity and superior filtration make the GM80 Residential an excellent tool for allergy- and asthma-sufferers.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5Amazing machine, well worth the money
By Bart Van Belle
It took a little assembly to get this machine to work, but it was well worth it. The quality is outstanding, the performance stunning and the ease of use just plain there.The vacuum is all stainless steel, with an easy accessible filter holder in the bottom. The bag is large and after a few uses still less than 1/8 full. That does not mean this vacuum does not vacuum well, because it does. The day I got it is when the cleaning lady had just come. I vacuumed the rug in the living room and extracted about a 1/2 pound of dog hair from it. The rug looked cleaner than it had in years.The machine is powerful, very quiet, easy to roll around, does not leave the awful smell the other vacuums left in the room, has a nice long handle and tube and is not that heavy. The only downside is that there is no auto cord or a decent place to roll the cord up. I end up slapping it around the top.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Nilfisk GM-80 Vacuum (HEPA) (Residential-01790032)

Best Price PLS Laser PLS-60536 PLS360 Laser Level System with Detector, Yellow

PLS Laser PLS-60536 PLS360 Laser Level System with Detector, YellowBuy PLS Laser PLS-60536 PLS360 Laser Level System with Detector, Yellow

PLS Laser PLS-60536 PLS360 Laser Level System with Detector, Yellow Product Description:



  • Operates on 3 d batteries for more than 55 hours
  • Has a working range of +/- 250-Feet, and is accurate to +/- 1/8 of an inch at 100-Feet
  • Tool comes complete with carrying case, ceiling wall bracket, operating manual, SLD laser detector, and a 1 year warranty
  • Leveling range of 6 Degree
  • Simplifies your work day with the press of a button

Product Description

The Pacific Laser Systems PLS 360 Laser Level System is a fully self-leveling laser tool, providing you with a continuous 360deg horizontal line of reference. Includes an SLD detector to provide an outdoor range up to 250 feet. The PLS 360 offers one button setup for indoor-outdoor applications. Unlike rotary lasers with sensitive moving parts, this compact, bright and durable tool has no complicated features or multiple knob adjustments. It saves time and simplifies your workday with the press of a button. U.S.A.

Customer Reviews

Most helpful customer reviews

7 of 7 people found the following review helpful.
4must have for remodelers
By davepro
If you're a professional remodeler/builder and don't have this laser, you need your head examined. This tool is money in the bank. From checking grades, leveling sill plates & setting windows to installing interior doors & cabinets your accurate layout is simply minutes away. Don't waste your money on cheap consumer grade equipment. PLS are truely engineered and built for professionals. I've been paying my bills building for 17 years and have tried them all. This is the real deal.

5 of 5 people found the following review helpful.
5don't bother with a rotary...this does more
By Bill D. Nunez
For the most part, my company does interior remodeling, but a month ago we started a ground-up construction project and I needed something to do exterior layout. I've had a PLS2 for a few years that has been one of my most valuable interior layout tools, so I thought I'd give another PLS tool a try. The PLS 360 is a simple tool...it projects a 360 degree horizontal line...that's all it does, and it does it well. Fast self-leveling and a bright beam, and to top it all off, the pulsating feature that works with the detector. Having used very few exterior lasers, I was a little confused about this technology at first, but it's simple: Rotary lasers project a 360 line by spinning a single dot, and mostly they all spin at the same speed. Laser detectors look for a laser oscillating at that speed in order to locate it. The PLS360 has a mode that flashes (pulsates) the laser line on and off at the same speed as most rotary lasers turn, so as far as the detector is concerned, it's seeing a rotary laser. You likely won't be able to see the laser in daylight, but the detector can, so you can use your laser under any lighting circumstances. Most all detectors are interchangeable since there is a standard oscillation speed for rotary lasers, so if you have a detector, you don't need another. The PLS detector comes with a clamp that can clamp it to a grade rod. Any grade rod will work, so again, if you have one there's no need to buy another.There is a trade-off with this laser vs. a rotary, which is distance. If you need to measure beyond a 250' radius of the laser, you'll need to go rotary. Otherwise, I think this is a better way to go because of the lack of moving parts and highly visible line for interior work.Combined with my new PLS90 laser, which also has a pulsating feature, squaring up a foundation took on a precision and ease that would have taken much longer with tape measures. And now I can't wait for my next interior project that requires a 360 degree horizontal reference.The only minor complaint I have with this tool is that that clamp for the detector does not open wide enough for some grade rods, so I had to take the rubber pads off the jaws to make it fit on my DeWalt rod. Otherwise, this tool is HIGHLY recommended.

3 of 3 people found the following review helpful.
5A 'Must Have' product
By E. Jaworski
This an awesome product. I've used other PLS products in my constuction experience and it's the first I've bought for myself. My first job was a kitchen cabinet install. I just stuck a screw in the wall, attached the provided bracked, stuck the level on the bracket, turned it on and the rest was history. Another example is relocating outlets. You can set the level on anything flat so I set the level on a bucket, turn it on, measure from the laser line up to the existing outlet, transfer that dimension over to the new outlet location and I'm done with layout.Yes there are other ways to do this type of work without the 360 but if you wotk by yourself and like gadgets, it's a good one to have.The only problem I had was with delivery. When it arrived it did not come with the laser detector as advertised and there was a sticker on the case that said 'Laser Only'. So I called Amazon and they said to send it back and they would send a new one. So I did that and the next one arrived with the same 'Laser Only' sticker. Needless to say I was not happy so I called PLS directly and apparently there was a shipping glitch from PLS so they overnighted the detector directly to me and I've been happy ever since.Ed

See all 9 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy PLS Laser PLS-60536 PLS360 Laser Level System with Detector, Yellow