Buy Nikon CoolScan V LS-50 ED Film ScannerNikon CoolScan V LS-50 ED Film Scanner Product Description:
- 4,000 dpi optical resolution, 4.2 density
- 14-bit A/D conversion, 8 or 16-bit output
- Scan speeds as fast as 38 seconds
- Digital ICE4 Advanced suite of image correction technologies
- Its USB interface, PC and Mac compatible
Product Description
A high-performance dedicated film scanner from Nikon, the CoolScan V ED offers high-quality scanning of 35mm slides, 35mm film strips, APS film (with optional IX240 film adapter), and prepared slides (with optional medical slide holder). The Scanner-Nikkor ED glass lens offers a 4,000 dpi optical resolution, while the 3,964-pixel linear CCD image sensor and 14-bit A/D input (8-/16-bit output) provide true-to-life, brilliant results.
Customer Reviews
Most helpful customer reviews
726 of 730 people found the following review helpful.
Great alternative to more expensive Coolscan 5000
By JanSobieski
The Coolscan V is an excellent cheaper alternative to the Coolscan 5000 which I have also owned. My immediate project included about 1500 slides from my own collection, my fathers collection, and my grandfather's collection.Most of my father's slides are Kodachrome. Much has been written about the inability of this scanner to scan Kodachrome slides and said about ICE4 not working with Kodachrome. Well, I have some good news The ICE4 does work extremely well for the most part. However, with Kodachrome slides it does produce minor artifacts in about 5 percent of the slides. I scanned with ICE (not ICE4) always on and then rescanned if I encountered unacceptable artifacts. I did notice that the scanner ICE feature was more likely to be stumped by old Kodachrome slides where subjects were wearing shirts with stripes.The GEM ROC and DEE (the other stalwarts of the ICE4 other than ICE itself) work on Kodachrome slides as well, but I found that the results were unpredictable and that I could achieve better results myself in Photoshop far more quickly. The GEM ROC and DEE features simply took too long and slowed down the scanning unacceptably. The results, for me, were not worth the additional scanning time. So I never used these features. But the "enhance" feature on the scanner I used nearly 100% of the time with great results - much better than the GEM ROC and DEE features.The scanner is fast and does produce wonderful wonderful detailed scans, easily demonstrating the grain in the transparancies at 3000 and 4000 dpi. The Kodachrome slides were a challenge to the Dynamic Range of the scanner, but I believe that most of the detail in the shadows that is there was extracted. With dark slides I used the VERY useful gain feature turning it all the way up to 2 in the really dark slides. Unfortunately, Kodachrome, with all of its many attributes, does have substantial downsides including a very narrow exposure latitude and shadow detail is simply lacking. I think the scanner accurately reproduced the information including the colors on the Kodachrome slides, with perhaps a slight bluish cast noticed in some cases.It wasn't until I was finished scanning all of the culled slides that I undertook to scan my select color negatives. And this scanner really came into its own scanning color negatives. Don't even TRY to scan color negatives without ICE because the results are unbelievably bad. Even pristine negatives have scratches and dust that magically are erased by the ICE feature. What a godsend. The scanned color negatives were just beautiful with very accurate color rendition. But immediately I noticed much more grain in the color negatives (Royal Gold and Fuji Superia Gold) than in the scanned slides.One note unrelated to the scanner itself. Until you've used a digital scanner to scan your color negatives you can't begin to realize how far superior Kodachrome, Provia, and Ektachrome slides are to color negatives insofar as capturing detail. Even the best color negatives have much more grain that Kodachrome. And the difference in color negatives is substantial too.The V was slower than the 5000, but honestly the difference for the non-professional scanner, to me, was not worth the additional investment. The V represents a superb value giving you nearly all of the advantages of the 5000 other than speed for a substantially cheaper price.The included Nikon software worked fantastic for me. I downloaded a copy of VueScan which according to many reviews is superior to the Nikon software and found that for me the Nikon software was easier to work with and produced superior results.Setup Summary: I scanned at a 16 bit color depth and 4000 pixels per inch with the scan enhancer turned on and the Digital ICE turned on. I did not use GEM ROC and DEE because of inconsistent results. I turned up the gain as necessary for dark slides and turned it down for light slides. Gain adjustments were only necessary on about 15 - 20% of the slides.Setting up the Nikon Scan window was a little tricky too. I placed the tool palette in the far upper right corner of the window with the scan window placed under it to the right. The image window occupied the largest portion space to the left.I can recommend this scanner without reservation. It is a phenomenal piece of equipment. If speed is not a paramount consideration and you are not a professional scanner needing the options (the auto feeder) offered by the 5000 then, in my opinion, the V represents an absolutely tremendous value.
253 of 258 people found the following review helpful.
First personal transparency scanner
By Steve Jacobson
Having worked with professional drum scanners (Hell Graphic Systems), I know a little about scanning. This Nikon Coolscan V ED is the first personal scanner I have worked with and am pleasantly surprised. I have inhereted the old familly slide collection and several of the slides are grossly underexposed, or darkened with age. The V ED has the sensitivity to pull out more image than I had hoped for, with very little noise. The provided software is no replacement for Photoshop, but can go a long ways to giving acceptable results without other image retouching software. I am eager to see SilverFast for the V ED however!
The only problems I've encountered is unexpected termination of the program, and mis-judging frame boundaries of negative strips. Negative scanning is a snap, an unexpected pleasure as thinking color in reverse is painful (on German drum scanners).
For the price, this is a very highly capable scanner worthy of your consideration. If your scan rate needs are high, consider the faster version, and a FAST G5 Macintosh. A 1.25 GHz G4 gets a workout on the tougher scans.
189 of 198 people found the following review helpful.
Scanner does not disappoint
By PJ
Decade's collection of fading film this COOLSCAN can handle. You can obtain detailed images that are truly vivid, sharp, and better than the original then technology. Just remember to use DEE correctly. Read below for further details on DEE.Batch scanning can be done with one click on the Scan button in Nikon Scan 4's firmware. The maintenance free red, green, blue, and infrared LED light source is gentle to film. The 4000 ppi optical resolution is an ideal start for outputting A3+ prints on the new crop of large format bubblejet and inkjet printers.Reading the Nikon Scan Reference Manual in the Nikon Scan Reference Manual/Easy Scanning Guide CD would be your best learning tool to get the most out of your scanner. For the most accurate results, the first thing to do before scanning is to set your preferences by clicking on the Prefs button in the Control Area of the Scan Window.When enabled, the Digital ICE quad Advanced software works well with most film. The Manual will explain that ICE, ROC, GEM, and DEE will not operate with the optional FH-G1 Medical Holder.ICE will not work on monochrome film unless the film has been developed in colour. ICE will not work properly on Kodachrome, but will work on other brands of slides. Noise may appear if ICE is used on overexposed or very vivid images. ICE will reduce the overall sharpness of the image. ICE is not not designed nor does ICE advertise itself to remove all dust and scratches from film. ICE will reduce most of the dust and scatches, however. You will have to use a third party application like Adobe Photoshop to remove the remaining dust and scratches. ICE alone will double the scanning time of 38 seconds.ROC may add colour to monochrome or grayscale images. ROC is not necessary for properly exposed colour images. ROC alone will almost double the scanning time.GEM will remove most grain and soften the image. Best to just use the default setting of 3 for a balanced smooth-grained result and to elimate any annoying hot pixels provided you haven't oversharpened or overused DEE. GEM alone will almost triple the scanning time.DEE works best when the image is cropped to exclude other unexposed areas of the film. Don't get me wrong, DEE does work beautifully! If Unsharp Mask (UM) is used incorrectly prior to processing the image, DEE will mainly show hot pixels in mid-tones and shadow areas effectively ruining the print. To avoid hot pixels in most photographs, either sparingly set the UM in Nikon Scan to less than 25% Intensity/25% Halo Width/0 Threshold Level or set the UM in Photoshop to about 125% Amount/1.5 Radius/1 to 3 Threshold. Depending on the image, using the default setting of 50 on DEE and adjusting the highlight lever from 190 to 255 will produce smooth and pleasing tones. Turning DEE off and using Photoshop CS's Shadow/Highlight tool sparingly on the processed image in LAB Lightness provides similar manual control of shadows and highlights. Also, remember to set the resolution output to your printer by clicking on the Custom button and select your printer in the Crop Menu. Also it's usually better to crop the image to the desired output dimensions to ensure 100% coverage (what-you-see-is-what-you-get) on your bordered prints. DEE alone will almost quadruple the scanning time.When enabled, Scan Image Enhancer (SIE) will automatically adjust hue. It does not work with darker images. In fact, the scan produces darker images. You are better off using DEE to pull out hidden detail in the shaded areas.ICE, ROC, GEM, DEE, and SIE together will almost quintuple the scanning time. While waiting for the breathtaking results, you can spend the next few minutes to contemplate on the next advanced Nikon or Canon DSLR to buy to release you from ever having to scan 35mm film.UM can be created to all colours, or individually to red, green, blue, cyan, magenta, or yellow colours in the image. Deselect blue if you do not want to emphasize the grain in an image with blue sky. Remember to use UM at the end before scanning the negative to output the final image.The SA-21 strip-film adaptor only works for 2 - 6 frames. To save money by not having to buy the optional 1 - 6 frame FH-3 film holder, place a 1 frame negative into an empty cardboard slide holder and insert into the MA-21 slide holder. Remember to select Neg (color), and Calibrated RGB in the Control Area before scanning.Along with a short USB 2.0 cable, included in the package is a Nikon View 6 CD, which is an application, used to organize saved pictures in TIFF and JPEG file formats only. According to the Manual, large files created in Nikon Scan may not show on Nikon View slide shows.Before clicking on the Scan button, press Ctrl (MS Windows) and the Autofocus button. Then left click on a focal point in the preview image to ensure accurate focusing at that point. You can always change the focus point using the same method, or by using the Focus Tool in the Layout Tools palette. The palette can also be customized to suit.If you have to use the Analog Gain palette to correct or adjust the colour values for each of the elements in the scanner's light source, your LED's may require repair. The probability of repair to the LED's is not specifically discussed in the Manual.If desktop or cubbyhole space is an issue, the scanner can be placed with either the top or side vents facing up. Remember to provide the minimum clearances to the scanner for ventilation. The dual wrap around band of rubber feet will ensure a cushioned slip resistant footing.After processing the image and for most situations for the various film brands, Photoshop gives you better fine-tuning control of the scanned image because of their larger selection of imaging enhancing Tools.Compared to filmstrip scanners that come with flatbed scanners, COOLSCAN has more options and is by far the better equipment to use to obtain satisfying scans, especially at 14-bit depth. Practice and patience will make perfect photographs.
See all 73 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
Buy American Furniture Alliance Stanford Mission Coffee Table, Honey Oak
Mission Style Coffee Table
Acceptable
