Best Price Asus P4P800 SE 865PE 800MHZ DDR 400 Motherboard

Asus P4P800 SE 865PE 800MHZ DDR 400 MotherboardBuy Asus P4P800 SE 865PE 800MHZ DDR 400 Motherboard

Asus P4P800 SE 865PE 800MHZ DDR 400 Motherboard Product Description:



  • Intel 865PE Chipset
  • 800 MHz FSB
  • Dual-Channel DDR400 Memory
  • Intel Hyper-Threading Technology
  • Wi-Fi slot for optional wireless LAN upgrade

Product Description

The Asus P4P800 SE Intel Motherboard is all about high-speed performance. It's got a wide range of AI features that make it a much friendlier board to set up. The AI features provide audio-sensing, net-diagnosing, CPU frequency and BIOS recovery functions, all from a user-friendly interface. It also supports Gbit LAN, 6-channel audio, WiFi and ore, with Serial and Parallel RAID support for superior data striping and disk mirroring, to maximize performance and security. 4 184-pin DDR sockets (DIMM); total capacity of 4GB DDR speeds - 266/333/400MHz AGP 8x slot 5 PCI slots 1 WiFi slot IDE support for Ultra DMA 33/66/100 Hyper-Threading support ADI AD1985 audio codec, supporting 6-channel audio LAN Type - 10/100/1000Mbps Gigabit Serial ATA RAID - 0, 1, JBOD Parallel ATA RAID - 0, 1, 0+1, JBOD

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
4Pentium 4 motherboard
By Robert Wurzburg
This was one of the first in a long line of "enhanced" ATX motherboards from ASUS.Support for the board is fairly good from the mfr. and it runs good. It comes witha number of utilities on the system/chipset driver disk, and older but potentiallyuseful add-on software.I used 4x512Mb Kingston KVR400X64C25/512 memory modules recommended by ASUS and itran in dual-channel mode with 2Gb total SDRAM @266Mhz. Usually the effective speedof RAM is half that of the rated speed, and the rated RAM speed half the FSB speedin most installations. This ASUS P4P800 SE has a 800Mhz FSB.The on-board GigE LAN worked good, and the AGP video slot also performed well witha NVIDEA GE Force MX100/200 64Mb add-in card for basic 32 bit VGA graphics. I used an Intel Pentium 4 3.0E Gigahertz Hyperthreading CPU (sSPEC #SL7E4) with EvercoolFAN-P4-S478-3 cooler in an ASUS TA-230 ATX case and included 300W P/S. A front fanand 2 rear fans were installed. This provided plenty of cooling in a well-ventedThermally Advantaged ATX 2.0 case. I installed Windows XP SP3 and IE7 in this set-up for an OS and Browser.For an older system used for email and other basic tasks, and for a print server itwill function quite well for everyday use, having 4 front and rear USB ports, plusPS/2 mouse and keyboard, parallel printer and serial port connectors. Older Legacydevices will find new life using this motherboard. Use a sound card like a CreativeLabs, the audio is MUCH better than the AC97 onboard chip can provide only basic.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Asus P4P800 SE 865PE 800MHZ DDR 400 Motherboard

Price Compare Blk Rugged Universal Pda Case for Otterbox 3600 Pda

Blk Rugged Universal Pda Case for Otterbox 3600 PdaBuy Blk Rugged Universal Pda Case for Otterbox 3600 Pda

Blk Rugged Universal Pda Case for Otterbox 3600 Pda Product Description:



  • Otter Box 3600 PDA Case - Black

Product Description

OtterBox3600Internal Dimensions: - 6.75" x 3.60" x 1.125"Waterproof Crushproof and AirtightFits 99% of PDA'sThe OtterBox 3600 PDA CaseThis case will accommodate just about anything you need attached to your PDA. The 3600 is for users who demand expandability and extreme ruggedness!Easily use PDA through recessed clear plastic screen Portals for printer GPS other cable connections Waterproof dustproof & airtight crushproof Secure stylus holder on outside of 3600 adjustable Velcro hand strap (easy to use with gloves)Unconditional lifetime guarantee. Note: Not intended for underwater useProduct : OTTER BOX 3600 PDA CASE BLACK FITS 99% OF PDA'S Manufacturer : OTTER PRODUCTS Manufacturer Part No : 3600-20-K1

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5GREAT BUY!!!!!
By Angelo P. Armano
I bought this case for my Dell Axim X5. It arrived fast and is working out great. This case gives your PDA a better feel and a more secure grip. I've used the other Otterbox cases and prefer this one due to it's ability to have access to you slots and I can charge and sync my PDA while it's still in the case.Best part is that when I upgrade my PDA to the HP 211...this case will still fit.

0 of 0 people found the following review helpful.
5wow
By Glorpigus Reximus
What a great protective system, but HUGE. If you want something you can put in your pocket look elsewhere. If you have a backpack to put it in then great. I've used it in the snow and rain works great.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Blk Rugged Universal Pda Case for Otterbox 3600 Pda

Price Comparisons for Hardwood Ebony 56" Spinning Media Storage Tower

Buy Hardwood Ebony 56" Spinning Media Storage Tower

Hardwood Ebony 56" Spinning Media Storage Tower Product Description:



  • Color: Ebony
  • Holds 1260 CD's or 560 large DVD's or 280 video tapes or combination
  • Storage capacity based on 0.38 in. wide CD, 0.75 in. DVD, 1.02 in. tape
  • Store your music video collection without using much space
  • These swivel towers are often imitated, but don't be confused

Product Description

TO-1260 Ebony Features: -Made of solid kiln-dried hardwood, not vinyl or veneer.-Turns on a steel ball bearing mechanism.-Adjustable shelving.-Revolves 360 degrees.-Made in the USA.-1260 CDs.-Compatible with Disney VHS tapes.-Any combination of the above. Specifications: -560 DVDs.-280 videos. Assembly Instructions: -Simple assembly in just minutes. Dimensions: -Overall Dimensions: 56 1/2'' W x 22 2/5'' H x 22 2/5'' D.

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
4Pro: It's hardwood! Con: It's not as solid as it should be.
By D. Tonya
This is a very nice spinner rack. The top, bottom, and 4 side poles are all solid oak. This isn't veneer over particle board. However, the 'shelves' are. Not that this would be a problem, but how the spinner is assembled calls into question the corners Wood Technologies has cut in order to boost their profit margin. Each shelf is actually an entire 2'x2' section just like the top and bottom caps. Each shelf rests on exactly 4 pins, one in each side pole. The problem arises from the fact that the shelves come dangerously close to not resting on the shelf pins due to the 'slack' between side poles. Now the shelves have never fallen for me. However I have also been quite wary of that possibility when spinning the rack.I'm kind of disappointed that Wood Technologies couldn't come up with a better design than this given the high cost of the unit. However, this may not be an issue for many of you if you have a relatively small collection. However, I have over 2000 cds and I filled this rack to capacity and all that weight on spinner causes the base pieces to touch when spinning. So don't spin it too fast or the whole thing might torque itself apart!

2 of 2 people found the following review helpful.
5Wow, talk about quality and easy assembly!
By Courtland J. Carpenter
The worst thing I can think of to say about this at the start is that you'll have shelves left over if you are going to use it for VHS tapes or DVD's. Nothing in the box tells you that, so you better do the math, and "not" put the shelves in to begin with. I think I had to leave out at least three. Contrast this with 95 percent of the storage units like this on the market with cheap, laminated, imitation wood particle board stucture as well as shelves, and sometimes hundreds of parts, glue, and other hardware to install. Now for the good stuff.The wood here is a solid hardwood structure, where only the shelves are made of a black painted particle board. The bottom is two hardwood squares already joined with a high quality, ball bearing, turnstyle. It turns easy, even when fully loaded it will flat out spin. The assembly, although possible with one person, (I did it with just me) is helpful to have two people, but just for a few minutes. You basically have two screws for each end of four side boards to join to the top and bottom support boards. That's a total of 16 screws, you put in some supporting rods in the middle and add the shelves which you'll pull up and attach after putting on the top board. Remember to count the shelves and measure so you know the number of shelves needed. If you miscount you'll have to remove the top and add more. The shelves are attached by 4 metal side pins like you see on most adjustable shelves, one near each corner. since they're square not retangular. They've glued backstop seams on the shelves so your DVD's etc won't get pushed to the back. It's an inspired design. Total assembly time 25 minutes by myself, I kid you not. The last shelve unit I built to hold 440 DVD's, took me six hours, and had over a thousand parts to assemble. I never could get the doors to hang right! This one even the non-handy can do, but remember it's hardwood, and the boxes they deliver (two) are heavy.Sturdy, heck I could sit on the top of this thing. The hardwood is almost an inch thick, and very strong, no bowing at all. As for storage, well it says 560 DVD's, and I put on nearly 600 on the shelves, and then another hundred on top of the unit for 700! You can even get in a lot more if needed as the middle is empty, and you can hide things or put extra DVD's or CD's etc. behind the displayed items. I had poor access to my collection when it was in this big open door cabinet. I had some titles so hard to see that I forgot I had them, and bought duplicates. Here now I can see everything with just a little spin.One word of caution though, don't spin it too fast or your DVD's may come flying out, that turnstyle is just too good. Shipping is typically free, which really means it's in the price. It would be expensive because of the weight. This is one of the few assembly items of furniture I've ever been happy with, so I'm sure you will too if you like the picture, and need the storage.

0 of 0 people found the following review helpful.
4Great DVD storage
By J. Simms
I've had this DVD shelf for 1 1/2 years. It's been great and is holding up well. Only complaint is that after tons of spinning it (once in a blue moon) seems to get at "the end" and you have to spin the other direction--again, very rare. Other than that I would have given it 5 stars.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Hardwood Ebony 56