Buy JET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-PhaseJET 649005K 22X44 Plus 22-Inch 1-3/4-Horsepower Drum Sander, 115-Volt 1-Phase Product Description:
- Zinc-plated steel tension rollers mount next to the drum to eliminate slippage
- Drum height and downward pressure are adjustable to eliminate snipe
- 1/16 inch per turn height adjustment for precision accuracy
- Thrust bearing height adjustment for easy adjustments
- Large, easy-to-use cast iron height adjustment handwheel allows both radical height changes and minute adjustments for extremely precise sanding thickness control
Product Description
The JET Drum Sander elevates woodworking tasks of sanding from long and slow to short and fast. The unique design of the JET 22-44 Plus Drum Sander provides ample capacity to handle small and large jobs with ease. Plus, it can sand up to 44in. wide with greater accuracy that anything else in its class. Features the exclusive SandSmart Technology that virtually eliminates workpiece or abrasive burn. Closed stand provides storage for accessories while casters allow for easy maneuverability in the shop. HP: 1 3/4, Motor: Conveyor motor: 43 in.-lbs. torque, direct drive, DC, Amps: 20, Material Type: Steel and aluminum, Drum Diameter (in.): 5, Drum Material Type: Extruded aluminum, Bearing Type: Sealed and permanently lubricated drum ball bearings, Overload Protection: On/off switch w/overload protection is front-mounted, Port Size (in.): 4 in. O.D. dust port for increased dust collection efficiency, Variable Speed: Variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute, Style: Closed stand drum sander, Speed (RPM): Conveyor speed: 0-10 SFPM, Drum Speed (RPM): 1,700, Motor Phase(s): 1, Motor Voltage: 115 (prewired 115V), Adjustable: Yes, automatic adjusters for the belt
Customer Reviews
Most helpful customer reviews
35 of 35 people found the following review helpful.
Worth every penny
By Bobby Stanley
I purchased this drum sander a week ago.I am rating the Performax 22x44 Plus Drum Sander with Closed Stand.The stand is completely assembled in the box. This is the first machine that I have assembled and didn't have any extra bolts or washers. Assembly was exactly as it was supposed to be with everything lining up perfectly. All allen wrenches were provided for assembly.I only had to tighten the brake pedal. The paint job is wonderful.The motor assembly is extremely heavy, however, I was able to assemble the entire machine in 20 minutes.I purchased the optional infeed/outfeed tables and think they are great but should cost less than $100, more like $50. No, they should be included, but are not necessary.Performance: The motor is unbelievable quiet. No vibration at all. It is hard to tell sometimes if the motor is running it is so quiet. I sanded a 14 inch wide board and the results were amazing. Dust collection is a must and my Delta 1200 CFM pulls 99% of the dust.I use a 30 AMP service for the drum sander.Drum alignment was spot on. It was only off by .002 of an inch. No adjustment needed at all!I give it 4 stars because the mobile base moves inline and does not allow you to easily steer the machine. I also wished the conveyor motor was a little beefier. No problems. I just would like the assurance. The motor adjusts from 0 to 10 fpm.(Update 12-1-06: I received the "handy" tool to assist with sanding belt changes. I COMPLETELY disagree with the instructions for changing the sandpaper on the drum. It is not necessary to use this tool. I and my family think this way is much better: Attach the paper to both sides, but do NOT tighten it on the motor side as instructed. Simply tighten it by hand on the left side where you have much more room and can do it with your fingers. If you own this tool you will see exactly what I am talking about. It is so easy this way.I am so happy I received this machine. It was given as an early Father's Day gift.4/09 Update: If I were looking today for a sander, I would take a hard look at Steel City's dual drum sander. You can put two different grits of paper on the machine and really move things along. The price is so close. You also get two four inch dust ports on it. I would buy it now if I didn't already have the Jet/Performax. honestly
19 of 19 people found the following review helpful.
My new workhorse
By OHtoolman
I purchase quite a bit of tools from Amazon, but I decided to buy this sander locally. There was a sale and mini show going on, so I got 10% off, plus a rep from Jet was there and threw in some free goodies, and I still received the current rebate. That was in January. I've used it on several projects now and can offer an honest review of my experience with it.First, I'd like to start by saying my shop has become more than just a hobby shop and is quickly approaching a full time business. I felt I needed to reduce the amount of time I spend sanding. Since I already own numerous Jet machines and have been happy with their quality and service, I researched their sanders first and came to appreciate the 22-44 Plus. Out of the box(s) the machine went together pretty easily and needed only minor adjustments to be perfect. Although it did have some minor hidden shipping damage, Jet corrected that promptly.Next came the learning curve. This is my first "real" sander so a couple sanding belts got ruined by trying to remove too much material at one time. Light cuts are the key. The crank to lower the sanding head moves down 1/64" per 1/4 turn and this is a pretty good reference to use when sanding. Sometimes I take a little more or less depending on the size and specie, but usually 1/4 turn per pass is just right for average size boards. I've not had any trouble changing belts. After doing it a few times, it takes about 2 minutes and I don't need to use the tuff tool. The tracking for the conveyor was a little fussy at first. I just dialed it in close and occasionally have to make a minor adjustment. This is real easy to do as Jet has put small wrenches on the adjustment bolts on either side of the conveyor. It takes about 3 seconds to make an adjustment and it can be done on the fly. Usually 1/4 turn on one of the bolts does the trick and it'll be fine for a couple more weeks. This sander will not totally eliminate the need to hand sand with a random orbital sander, however, it will greatly reduce it. Plus it'll flatten any unevenness. T The sander will leave a linear scratch pattern similar to a belt sander, even with 220 grit, that will need removed before final finishing. I've found loading up my random orbit sander with a slightly courser grit, the linear lines will remove with a good once-over. For example, if I drum sand to 220 grit, I can remove the scratch marks easily with a light pass of 180 grit in the random orbital sander. Also, a sharp card scraper will remove the scratch lines from 220 grit pretty easily if you prefer scraping over sanding for final finish work. Additionally, I'd recommend sending the boards through the sander 2 or 3 times on the final pass without changing the depth of cut. It'll reduce the depth of the scratch pattern and make sanding/scraping easier. Note- although I suppose boards could be thickness sanded, it would take a looong time, so keep the planer for getting lumber close, and then drum sand to final dimension. I took the rebate check from Jet and bought the extension infeed/outfeed tables for the sander. They are real nice for longer boards, easy to install and very stout. When installing, keep them just slightly below (mine are .04", or the thickness of a piece of 80 grit sandpaper folded in half) the height of the conveyor or else it will not feed right. I highly recommend the tables. The fit and finish of the machine is on par with the rest of the Jet tools I own. They do a nice job finishing their tools. This is probably the least important to me when purchasing a tool as I buy them to work, not to sit and be pretty. But still, I do take care of them and it's nice they look so good year after year. The machine comes with casters built in to the base. The casters are fixed, so they do not swivel. Nice for moving the machine back and fourth but not so nice for moving around. I'm tall and need to raise the machine up a few inches to be comfortable anyway, so a custom mobile base is in the works. The sander saves me an untold amount of time and produces smooth parts of equal thickness. It is connected to a Jet 1100 dust collector and sanding is nearly a dust free operation.The machine is a joy to use. Plus, it's pretty quiet. I'd purchase it again without reservation. --dave
13 of 13 people found the following review helpful.
Jet 22-44 Drum Sander w/ closed stand
By Ronald Haefner
The Jet 22-44 is a very good drum sander. I have extensively used a Delta 16-32 drum sander for a number of years and was able to sell it for nearly what I paid for it so the upgrade to a wider unit was financially feasable. I took a look at a lot of machines and read through a lot of the operators and parts manuals. This looked to be the most foolproof, reliable, easy to operate and should have a low operational cost.The machine came in three boxes and were very well packaged. The boxes contained the sanding head, cabinet, and conveyor belt. Assembly is very easy. The sanding head goes on top of the cabinet and then the conveyor goes inside of the sanding head. The conveyor even features ceramic guides to help eliminate creep of the conveyor belt. I have yet to adjust the belt tracking. A standard 20 amp circuit is sufficient to operate the sander. No special wiring is needed.The smart sand feature works well on the machine. I can set the belt feed to 60 or more and the smart sand will slow the belt down when wider stock is fed through and back up when narrower stock is sanded. This feature has really made using this unit a real pleasure as I dont worry about stalling the motor, burning/gouging the stock, or ruining the sand paper. The key is don't take too much off during a pass.Turn the depth wheel 1/4 of a turn for the next pass or 1/8 turn for highly figured or unusually hard woods like locust or wenge. I usually check the temperature of the wood on exit and put it aside if it starts to get fairly warm. No scientific data but it does seem to help eliminate spotty burn marks especially around the occasional knot that may be present. these usually will hand sand out fairly easily but why not eliminate it from the start.Working with burl, birdeye and other highly figured woods sucepible to tearout on a planer/surfacer is very easy with this machine. It just takes a little more time to surface down these woods. Sanding surfacing makes it possible to make some very nice projects much easier.After using it to sand over 1000 bf of oak and walnut I have no concerns. I use 80 grit most of the time and then sand with a random orbit sander with 80 and then 120 and its ready for finish. On door panels I will sand the individual parts right after the dry fit so there are no cross grain scratches. Finish sand after glue up. I have also glued up and then sanded the whole panel. in this case its better if you drum sand to 120 before the finish sanding to hel get the cross grain sanding marks out. Also becareful (as one should anyway) when gluing up to assure the style is in plane with the rail. Sometimes the clamp can cause this problem if the jaws are not perfectly parallel on the clamp. But this machime can certainly sand it flat again should this happen.The inline stand seems a bit narrow especiallly given that the feed table overhangs it by a ways but it is not a stability issue. I dont mind the inline wheels as the machine is usually pulled straight out from its storage location for use and rolls straight back in when done.The optional feed tables should have come with the unit but it is possible that one would not need these if running stock of less than 3 or 4 feet long. It does take up more space. I would have liked to seen a design where the table was a set of arms with a roller that would flip up then one could feed stock with the roller arm up or down and flip them up for storage. When running wide stock say 40 inches like on a table top then give the stock some support on the edge that is not under the drum head. In/out feed rollers are recommended for stock 5-6 ft and longer.Dust collection is mandatory. And an ocassional cleaning of the paper is good too. Soft woods like pine dont do well as it clogs the paper rapidly. Hard woods like oak, walnut, et al work very well.Changing sand paper is easy. The handy tool they give you is still sitting in the package. I found that it was easy to change the paper with out it. Though my fingers are fairly thin, others may find it difficult to pull on the sandpaper clamp. The tool would be useful in these cases. Start on the outboard side and wind your way to the tensioner on the inboard (motor) side. I re-checked the sand paper tension after running a board after changing the sand paper and found it not necessary. The right hand side has a tensioner on the sndpaper clamp and it keeps the sandpaper taught. Only a little practice is necessary and changing sandpaper is easy.The sander came nearly perfect on the paralellism. It is easy to see that it could be a bit frustrating to set paralellism if needed but no more than say setting jointer or planer blades. In fact it should be a bit simpler as there is only the one drum to set. Careful snugging, checking, and then tightening of the bolts should eliminate any creep in the adjustment.I did notice a curious oddity when making a thin piece of veneer od about 1/16" thick. The drum was making contact with "something" when lowering it down to the thickness of the veneer. It turned out that my dust collection system had enough suction that it was actually picking up the belt. The belt appeared to be tight enough and closing down the gate partially for the sander solved the problem. The sander doesn't need a large volume of air as the particulate size is rather small. Not often when things work too well that causes an unexpected negative consequence. I don't make veneers very often but this most certainly is one of those "not in the book" things you learn.In short this is a great machine.
See all 14 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
Buy Powermatic 1791296 Model 209 20-Inch 5-Horsepower Planer, 230-Volt 1-Phase
good idea but alignement issues